What are the advantages of the pre-stressed corrugated pipe installation process?
Release time:
2023-04-28
What are the advantages of the prestressed bellows installation process?
The advantage of the prestressed bellows installation process is that the tension end formwork is tightly closed, not easy to leak, and the time of piercing can be staggered with the time of rebar installation and bellows installation and concrete pouring to improve work efficiency. At the same time, the prestressed steel strands are exposed to a high temperature weather, if the time left in the hole is too long, it is easy to produce a serious rust, this method can avoid such problems. If it is used in waterproof water, it may be equipped with a plastic hose connector, if you need to use a connector, you should choose the standard model of the national standard when opening the prestressed bellows, so as to avoid the phenomenon that the hose and the fitting are not tight or the pipe head and small card do not go in. The tube should also be slightly harder, so that the stuck connector will not fall out as soon as it is pulled.
When using prestressed bellows, be careful to open the package, do not let the tube be messed up so as not to cause unnecessary entanglement, and then cut the required length, the harness or wire through, if the wire is thinner or more, try to choose a harder plastic bellows, so that it is easier to wear the harness, if you need water or other liquids, the cut pipe first fill the water to try to see if it will leak, so as not to install and then need to disassemble. If it is used on large machinery or automobile wiring harnesses, it is recommended to cut the prestressed bellows to use, because the general large mechanical wiring harness is longer and more, may not be convenient to pass through, such as the use of split open direct release is more labor-saving, when the line is put in after fixing it with adhesive tape.
Next:
Related News